 |
 |
 |
 |
| |
How to identify tooth families by measurement!
Measure across the rear of the tooth at a near 45 degree angle at midpoint of the angled walls.
|
| Example: |
2.0” measure is a 200R size |
 |
|
3.5” measure is a 350R size |
|
4.5” measure is a 450R size |
|
|
| Tooth Part Numbers: The first digits of the tooth part number |
| identifies the ”R” Rhom size. |
Rhom Attachment Hardware
How to identify attachment requirements!
|
•The standard Cat style pin and retainer system is identified by a
last digit “0” |
•The standard H&L style Flexpin system is identified by a last digit “1”
|
| Example: |
200RC = Cat style pin and retainer |
|
201RC = H&L |
|
350R9C = Cat style pin and retainer |
|
451R2 = H&L Flexpin system |
|
|
| Tooth Configuration |
|
|
|
0 0 Wide tooth design |
|
|
|
1 1 Short tooth design |
|
|
|
Lon2 Long tooth design |
Examples: |
|
|
Abr3 abrasion tooth design |
250R2H |
Rhom 250 Heavy Duty Long |
|
Sta4 Star tooth design |
451R6 |
Rhom 450 Rock Penetrating Star |
|
Sli 5 Slimline tooth design |
450R3H |
Rhom 450 Heavy Duty Long |
|
6 Rock Penetrating Star tooth design |
201RC |
Rhom 201 Claw |
|
7 Twin Sharp (Twin Tiger) design |
200 R2C |
Rhom 200 Long Claw |
| 8 |
301R4 |
Rhom 301 Star |
|
9 Penetration tooth design |
350R2 |
Rhom 350 Long |
|
C Claw Patented tooth design |
351R7 |
Rhom 351 Twin Sharp |
|
D Dual Purpose tooth design |
201R2D |
Rhom 201 Dual purpose Long |
| H Heavy Duty tooth design |
350R7H |
Rhom 350 Heavy Twin Sharp |
|
|
|
|
|
